PET (Polyethylene Terephthalate) Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic. The electrical insulation of PET is perfect and little be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents. Intolerance of hot water immersion and alkali. 
Feature:

1.Oil resistant, fat resistant, acid resistant, alkali resistant, resistant to most solvents. 

 2.Excellent resistance performance of high and low temperature.

 3.Non-toxic, tasteless, health and safety.

 4.Transparent, UV blocking, good glossiness. 

Item	Unit	Index
Intrinsic viscosity (IV)	dL/g	0.80 ± 0.02
Crystallinity	%	≤60
Acetaldehyd Content	ppm	≤1.0
Color (L-value)		≥83
Color (b-value)		≤1
Melting point	°C	243 ± 2
Moisture Content	%/w	≤0.4
Weight of 100 chips	g	1.55 ± 0.10
Dust content	ppm	≤100

1. It is widely used in packaging, electronics, health care, construction, automotive and other fields.

2.It is used in synthetic fibers, and engineering resins often in combination with glass fiber. 

3.Beverage, food and other liquid containers. 

4.our products

5.Packaging Details:
1.Packing:
In 25kg PP woven bag, or per your requirement.
17-17.5mt/20'FCL  24-24.5mt/40'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.